Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

Flex Rating – 3 (1 Soft - 5 Stiff)

True Twin – Freestyle specific: Identical tip/tail lengths, symmetrical core profiling, flex and a centered binding stance.

Quadralizer Sidecut – Explosive combination of Equalizer and Quadratic sidecuts allows high speed carving as well as superior edge control in tight spots.

Aspen SLCT Core – Every single wood strip is hand selected to ensure unparalleled core quality and lightness.

Popster – Popster's shaped core profile is strategically milled inside of the insert packs, allowing the board to flex more naturally underfoot and transfer energy into the nose and tail for added pop.

Biaxial Medium Density Fiberglass – Medium density European-made fiberglass layers guarantee a consistent quality level, for light and lively boards.

Ghost Carbon Beams – Two carbon beams inserts on tip and tail for maximum pop and increased stability during high speed charging.

Royal Rubber Rails – Full length rubber sidewalls provide the highest level of dampening and protection.

Sintered Base – Provides a moderate balance between the speed created by a hard surface and good wax retention.

Medium Stone Finish – A medium structure finish that improves base glide. Quicker in all snow conditions, from cold morning corduroy to spring slush.

Freestyle Edge Bevel – From detuning the tip and tail to a 2-degree edge holding tune throughout the key parts of the sidecut, back to a 3-degree bevel between the feet. This delivers the complete blend of edge hold and forgiveness on rails.

30% Bio-based Resin – High performance with low environmental impact, this bio-based resin is made with 30% of its molecular structure derived from plants.

Natural Wax

2 x 4 Insert Pattern

Medium Flex – The happy medium of binding flex. Medium flex models perform equally on all terrain. Great for progression - responsive, comfortable and forgiving.

Re:Flex™ Binding System – Offers more flex, feel, and cushioning than traditional disc bindings, in a package that's universally compatible with all current mounting systems, including 4x4, 3D® (via Burton Rider Service, sold separately), and the Channel®. The minimized, cored base-plate with Living Hinge™ disc reduces the weight and footprint of the binding, while also bending freely for a more natural flex.

Single Component 18% Short-Glass / Nylon Composite Baseplate – A high‑performance blend featuring ramped up strength in a soft‑flexing package. One material throughout creates consistent response and feel for all-terrain domination.

Re:Flex™ FullBED Cushioning System – Offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, the stealth trap door design makes it easy to access the mounting hardware.

FLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker you heel-edge turns. Crank them forward for icy hits in the pipe or back them off for jibbing. Tool-free and micro-adjustable for easy fine-tuning and maximum angle options.

Compatibility – Must Be Used with Burton Step On™ Boots

Re-Ground Materials to Reduce Waste

Compatible with All Major Mounting Systems – Please note, the 3D Hinge Disc is required for mounting on 3D systems (not included).

Medium Flex: 5-8 (1 Soft - 10 Stiff) – A balance of quick edge engagement and a more forgiving, playful feel. Great for all-around riders.

Total Comfort Construction – Get an instantly broken-in feel right out of the box. Total Comfort's industry-exclusive construction eliminates the break-in period for a fit that feels just as good from day 1 to day 100.

1:1 Medium Flex PowerUP Tongue – Burton offers 1:1 lasting on every boot. It means every half and full size shell, tongue, and out sole offer a precise fit that is not as common as one would think. Drop your loot on a Burton boot and you won't be stuck with the slop of a mismatched shell and liner. PowerUP tongues feature additional dual-density material for rebound and durability.

Women's Specific True Fit™ Design – Enjoy a more harmonious connection with Burton's True Fit™. True Fit means that every element -- from boot liners to lace guides, baseplate to strap designs, board shapes to flex profiles -- has been designed and engineered for the way women ride. Because when it fits right, it rides better.

Snugger Strap – This ankle strap is built into Step On™ boots and allows the rider to adjust heel hold and forward flex stiffness. Controlled by a Boa® dial and Warrantied for Life performance of Burton-exclusive New England Rope laces.

Imprint™ 3 Liner – DryRIDE Heat Cycle™ Lining | Focus Cuff Heel Hold System with Velcro® J-Bar Interface and Inner Lace Lock | Plush Cuff 1.0 (women's only) | Lightweight Power Panels | Velcro® Liner Closure | Level 2 Molded EVA Footbed with ESS Support Shank and Aegis™ Antimicrobial Coating | Heat-Moldable

DryRide Heat Cycle™ Lining – Warmth and wicking are two key traits for on-snow comfort. Burton's breathable inner-lining technology utilizes interwoven thermally activated carbon thread to capture, radiate, and reflect body heat inward to keep feet warmer while also wicking heat-robbing moisture outward. Look for varying amounts and performance level of each liner.

Focus Cuff – Boosting heel-hold by hugging that sweet spot around your ankle, the Focus Cuff rides slightly higher on your ankle than the Lock-UP Cuff for increased response.

Lightweight Power Panels – To ensure a consistent flex from day 1 to 100, Burton Imprint™ and Life liners feature strategically placed Power Panels that, even after being deeply flexed, return to their original position.

Aegis™ Antimicrobial Coating – Antimicrobial coating on the lining of the boot fabric keeps your boots from creating their own mini-ecosystem of stink by preventing the growth of odor-causing bacteria.

Plush Cuff 1.0 – The Plush Cuff 1.0 hugs your calf like no other thanks to a combination of medial and lateral neoprene stretch zones and a super soft fur lining.

Dual Zone Boa® System with New Sequence™ and Coiler™ Technology – All Burton men’s, women’s, and youth boots with Boa® feature the virtually indestructible, warrantied for life performance of Burton‑exclusive New England Rope laces. Built with a redesigned inner coiler spool to route the laces, the dial‑it‑in system retains its quick, easy, and effective lace adjustment. Natural fiber ropes equal a more natural flex and feel for greater all‑day comfort.

TX3 Lacing – The best of both worlds. TX3 is a flexible and low-friction textile lace used in high-power boots to provide a soft, modern design aesthetic with lasting durability and strength.

Level 2 Molded EVA Footbed – EVA Footbeds are lightweight, long-lasting, and absorb shock.

Step On™ EST® Outsole – EST® goes beyond bindings by drawing inspiration from the surf/skate heritage of snowboarding and giving you a more direct connection to your board. By eliminating the ramp angle of your outsole, EST lowers your center of gravity, improves board feel, and creates a more surf/skate-like feel.

Sleeping Bag Reflective Foil – This low-profile and lightweight underfoot technology reflects heat back to the feet, improving both warmth and comfort when faced with cold conditions.

Snow-Proof Internal Gusset – All Burton boot tongues feature an internal gusset construction to completely seal the lower zone of the boot, keeping your feet warm and dry.

Compatibility – Must Be Used with Burton Step On™ Bindings