Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

Flex Rating – 4 (1 Soft - 5 Stiff)

Tapered Directional – Tail width is slightly tapered (2-20mm). This loosens up turning initiation and improves floatation in deeper snow without sacrificing edge hold on hardpack.

Radial Sidecut – Radial is the classic sidecut for consistent response forward and switch.

Popster – Popster's shaped core profile is strategically milled inside of the insert packs, allowing the board to flex more naturally underfoot and transfer energy into the nose and tail for added pop.

Aspen Strong Core – CNC-selected high-density wood strips for the inserts and rail zones results in improved impact resistance and a predictable flex from opening day to spring slush.

FSC® Certified Wood Core

Biaxial Low Density Fiberglass – Low-density fibers allow for lighter boards that keep their playful forgiving flex forever.

ABS Sidewalls – The molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining toughness for energy transfer and dampening properties for impact absorption.

Sintered Base – Provides a moderate balance between the speed created by a hard surface and good wax retention.

Fine Stone Finish – Fine stone finish helps speed up in powder or softer snow conditions.

All-Mountain Edge Bevel – A 1° edge holding tune throughout the key parts of the sidecut meets a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.

2 x 4 Insert Pattern

Response – 3 - 6 (Soft - Medium)

Medium Flex – The happy medium of binding flex. Medium flex models perform equally on all terrain. Great for progression - responsive, comfortable and forgiving.

Single Component 18% Short-Glass / Nylon Composite Baseplate – A high‑performance blend featuring ramped up strength in a soft‑flexing package. One material throughout creates consistent response and feel for all-terrain domination.

Re:Flex™ FullBED Cushioning System – Offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, the stealth trap door design makes it easy to access the mounting hardware.

Toe Hooks 2.0 – Located on the front of each boot, toe hooks keep the toes securely fastened in the Step On binding.

FLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker you heel-edge turns. Crank them forward for icy hits in the pipe or back them off for jibbing. Tool-free and micro-adjustable for easy fine-tuning and maximum angle options.

Step On® Binding System – Step On® boot-to-binding system uses two points of connection by the toe utilizing Toe Hooks 2.0 that feature a spring hinge that flexes to maintain closure and provide an easy entrance and exit and one connection point by the heel for increased boot and binding response.

Medium Flex: 4-7 (1 Soft - 10 Stiff) – A balance of quick edge engagement and a more forgiving, playful feel. Great for all-around riders.

1:1 Medium Flex PowerUP Tongue – Burton offers 1:1 lasting on every boot. It means every half and full size shell, tongue, and out sole offer a precise fit that is not as common as one would think. Drop your loot on a Burton boot and you won't be stuck with the slop of a mismatched shell and liner. PowerUP tongues feature additional dual-density material for rebound and durability.

Youth Imprint™ Liner – This liner has an integrated liner lacing and inner lace lock, is heat-modable, has fit panels, and a level 1 molded EVA footbed.

BOA® System – A highly dependable lacing system that can be adjusted at a moment's notice anytime, anywhere. The simple twist of the knob at the top of the boot strategically tightens in just the right places.

TX3 Lacing – The best of both worlds. TX3 is a flexible and low-friction textile lace used in high-power boots to provide a soft, modern design aesthetic with lasting durability and strength.

Step On™ Outsole

Compatibility – Must Be Used with Burton Step On™ Bindings